Useful Firmware for your Galaxy Note. (GingerBread and ICS) with step by step installation.

A. GingerBread N7000XXLA3 - Download (pass to extract zip file : samfirmware.com)

How to Install :

Makesure your computer/laptop have KIES installed. Download latest KIES here.

1. Run Odin3 v1.83.exe (Locate it inside your zip file)
2. Load PIT file
3. Load PDA
4. Load PHONE
5. Load CSC
6. Make sure Re-partition checked.
7. Boot to Download Mode (Vol Down + Home + Power) *Continue if asked to do so.
8. Connect your phone to your computer.
9. When ID:COM turn to yellow. press START.
10. Wait 'till PASS.

You are now on GingerBread Firmware. Safe to Factory Reset and Format your SD. Clean :)

AND THEN..... (straight to....)

B. ICS N7000ZSLPF - Download

How to Install :

1. Run Odin3v1.87.exe - Download here or here
2. Load PIT
3. Load BOOTLOADER
4. Load PDA
5. Load PHONE
6. Load CSC
7. Make sure Re-partition checked.
8. Boot to Download Mode (Vol Down + Home + Power) *Continue if asked to do so.
9. Connect your phone to your computer.
10. When ID:COM turn to yellow. press START.
11. Wait 'till PASS.


You are now on Ice Cream Sandwich (ICS) Firmware.
From here : DO NOT MAKE FACTORY RESET / FULL WIPE while you are on STOCK kernel.

AND THEN..... (straight to....)

C : Latest ICS Firmware that have Custom ROM.
      N7000XXLRT - Download

How to Install :

1. Run Odin3v1.87.exe
2. Load PDA only.
3. Make sure Re-partition UNchecked.
4. Boot to Download Mode (Vol Down + Home + Power) *Continue if asked to do so.
5. Connect your phone to your computer.
6. When ID:COM turn to yellow. press START.
7. Wait 'till PASS.


You are now on LATEST and CLEAN Ice Cream Sandwich (ICS) Firmware. :)